Fluidgel - 5ml - Premioform 

General characteristics:
• Light-curing gel intended for the PREMIOFORM onychoplasty system
• Used to complete and stabilize the activation element after applying the BASE
• The BASE and FLUIDGEL together form the light-curing plastic compound that stabilizes the edges of the nail after they have been tensioned by the activator  
• Applied directly into the recess and the gel chambers of the PREMIOFORM activator
• Consistency allows the gel chambers to be filled up to the upper edge
• Light-cured with the PREMIOLUX lamp for 60 seconds
• After curing, the dispersion layer is removed using an alcohol pad
• If the layer is too thick, the cured gel can be thinned using a file or drill bit  
• Used with the other components of the PREMIOFORM system: activator, BASE, OrthoGlue and PREMIOLUX
• Contents: 5 ml
• For professional use only

Benefits for the podiatrist:
• Allows the activator to be filled and stabilized on the nail plate
• Precise application into the different gel chambers of the activator
• Fast light-curing in 60 seconds with PREMIOLUX
• Thickness can be adjusted after curing by drilling or filing if necessary
• Component specifically designed to fit into the PREMIOFORM protocol for correcting deformed and ingrown nails
• 5 ml size suitable for professional use in the clinic

Directions for use:
After light-curing the BASE, clean the application brush with an alcohol pad. Place a drop of FLUIDGEL into the recess of the activator, then spread the gel into all the chambers until the activator is completely filled to its upper edge. Light-cure with PREMIOLUX for 60 seconds, then wipe off the dispersion layer with an alcohol pad.  

Precautions:
Avoid any contact of FLUIDGEL with the skin and eyes, as irritation or allergic reactions may occur. In case of contact with the skin, wash immediately with soap and water. In case of contact with the eyes, rinse thoroughly for at least 10 minutes and consult a doctor.